Premium 1400°F Hi-Temp Brush-On Paint
RUTLAND Premium 1400ºF Flat Black Brush-On Paint is specially formulated to resist peeling and blistering under temperatures up to 1400°F. Renews the finish on any natural cast iron, grills, ovens, or cookers – anywhere a high-temperature-resistant, flat black coating is needed. This quality paint is great for grills, stoves, smokers, stove pipes, fireplace inserts, furnaces, barbecues, mailboxes, lampposts, fireplace tools, brass, firebrick, and chimney caps.
- Low VOC formula
- 16 fl oz Can
- Flat black
- Contains no lead, fluorocarbons, or vinyl chloride
- No primer needed
- 1 year UV resistance after application
- Fast drying and color-fast
- Non-toxic when dry
- Weather- and heat-resistant
- At least two layers are recommended
- Heat cure is not required for two layers, but best results are obtained after heat curing
- Heat cure is required for three or more layers
- Not for direct food contact
- Indoor and outdoor use
- Can be used to paint the inside of a masonry firebox
- Approved for sale in California
- Made in the USA
DIRECTIONS Wear protective gloves and eyewear. Prepare surface by removing all loose, scaly material and sanding rusty spots with fine sandpaper. Remove any polish or wax with lacquer thinner. DO NOT THIN PAINT. Stir paint until uniform throughout.
Brush on COLD SURFACE. FIRE MUST BE COMPLETELY OUT. At least 2 layers of paint are recommended. For best results, allow paint to air-dry for 24 hours, then heat cure to 500°F. Be sure all paint is dry before re-firing. Provide ventilation when firing for the first time after painting. Some smoke and odors are given off during this process.
Heat cure is recommended for best results. For 3+ layers, heat cure is required.
Questions & Answers
Have a Question?
Be the first to ask a question about this.