Skip to content
Happy New Year! ✨ Use code ATLAS for 10% off your first order with us
Happy New Year! ✨ Use code ATLAS for 10% off your first order with us
Contact Policies About
Injection Grout/Mortar 5-Otterbein-znshoping.store

Injection Grout/Mortar 5

by Otterbein
$6.25 - $37.25
$37.25
$6.25 - $37.25
$37.25
Size: 55 Lb Bag

Otterbein Injection Grout/Mortar 5

Special lime mortar based on natural hydraulic lime for filling cavities, filling cracks and joints with a caulking gun or injection pump and for strengthening natural stone and clinker masonry indoors and outdoors, especially for objects relevant to monument preservation.

HISTOCAL ® injection mortar - M5 - consists of natural hydraulic lime (NHL) according to EN 459-1, pozzolan, grain graded crushed lime sand and additives and is a purely lime-bound, cement-free product. HISTOCAL ® injection mortar – M 5 – is suitable for filling cracks and cavities , particularly in historical buildings and when renovating masonry. It impresses with its soft, plastic consistency , is pumpable and pressure-resistant .

Technical Data
Product Brochure

Spreading Rate

21 l wet mortar each 25 kg (55lb) bag

Water Consumption

approx. 0.33 l/kg

Composition

HISTOCAL® Injection mortar – M5 consists of natural hydraulic lime NHL 5 acc. to EN 459-1, Puzzolan, grain-classified crushed lime sands and improvement additives.

Properties
  • Free of cement
  • Soft, plastic consistency
  • Lime-bound
  • Suitable for pumping
  • Pressure-stable
Application

HISTOCAL® Injection mortar – M5 is suitable for the filling of cracks and hollow spaces, in particular at historic monuments and for masonry renovation.

Substrate

The substrate must be clean and free from loosely attached particles. A sufficient preliminary wetting is compulsory.

Special notes

Protect fresh mortar against fast drying-up. The air and surface temperature must be at least 5 ° C and maximum 25 ° C. HISTOCAL® Injection mortar – M5 shall only be used in the original state without additives.

Storage

Dry, if possible on wooden shelves and protected against draft.

Technical data
  • Mortar group: M5 acc. to EN 998-2
  • Fire Class: A1
  • Compressive strength after 28 d: >5N/mm2
  • expected compressive strength after 56 d: >10 N/mm²
  • Solid mortar density: 1.45 kg/dm³.
  • Largest grain size: < 0.7 mm
  • Water absorption: W0
Safety instructions

Mortal will react very alkaline with water, thus: Protect skin and eyes, rinse thoroughly with water in case of contact, immediately contact doctor in case of eye contact.

Quality-monitored production

HISTOCAL® Injection mortar – M5 is continuously tested in our plant laboratory within the scope of our in-house monitoring with respect to the fulfilment of composition and properties. This will ensure a uniform quality of the product.

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question